S0-738 User Manual PAGE
：
4
43-S0-738 User Manual DATE:10-14-2008
42
ISO 9001 Certified
台 揚 企 業 集 團
MTI Group.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
¾
2.4G devices exist other strong interference signals, try to turn off
other 2.4G equipment to view the situation is improving; will produce
interference shielding device, or location adjustment;
¾
RF signal has been shielded. Environment itself may impede
communication between wireless devices.
Network equipment to set up good after the rate is not high why?
¾
First, rule out the installation of reasons, such as the direction
of errors, etc.;
¾
Second, need to take into account the existence of possible
interference, including interference from other 2.4G devices, such
as channel interference.
wireless link has been established, but can not access internet
¾
There is some problems with the Ethernet HUB port or UTP cable
。
Please
check if the LINK light is bright on the HUB port
，
if the port does not work
，
please
try another HUB port
；
¾
Equipment Ethernet port has problem
。
Check if the
equipment Ethernet port
is working
ping equipment Ethernet is connected look up; when the direct
connection and computer, check whether the crossover cable, when and
HUB connection, check whether the use of straight-through cable.
