![background image](http://html1.mh-extra.com/html/orinda-networks/s0-738/s0-738_user-manual_1651746009.webp)
S0-738 User Manual PAGE
:
4
43-S0-738 User Manual DATE:10-14-2008
11
ISO 9001 Certified
台 揚 企 業 集 團
MTI Group.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為,將被視為侵害
台揚集團之智慧財產權,將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
To ensure the power supply is at the normal circumstance
,
Net lines used to connect to the
CABLE / ADSL MODEM or other entities on the network, the normal green
light for always.If instructions are not normal, first check the cable
line sequence is correct, if the Nets are adaptive mouth, direct connect
and cross - Lines can not cross-Adaptive Net line I needed.
WLAN lights: AP normal working indicator light
Under normal circumstances, there is a wireless network adapter connected
to the AP on WLAN when there is the law of the flashing, the frequency
of slow; when there is data streams, WLAN lights flashing faster frequency.
Note: When there is no wireless card even when on, WLAN light does
not shine.
2.2.2
Backplane Interface
Power Interface
6V/2A power adapter attached power cord, plug one end of the power
users communicate on 220V power socket, the other side of the small
round connector is inserted into the Indoor AP2411 Block 6V/2A DC power
supply hole.
ANT
interface
Indoor AP2411 has two anti-polarity SMA female antenna port.
Ethernet LAN port
This port for RJ-45 Ethernet ports can be linked to your ADSL or broadband interface
。
CONSOLE
口
RJ45 Ethernet debug port through serial line and the laptop to connect.