Installation
24
3. Secure the mounting holes with screws (four pieces).
Screws
Spring washers
Mounting holes (4 places)
Positioning pin holes (2 places)
4-6
Installation method of
DGB85
and
DGB130
types
Provide screw hole machining in the mounting plate when installing the actuator.
Use two positioning pin holes when positioning the actuator.
Values of the tightening torque are recommended. Tighten the screws with a suitable torque according to the design
conditions of the mounting plate.
z
Specifications of mounting plate
Model
Thickness
Material
DGB85
8 mm (0.31 in.) or more
Steel or aluminum
DGB130
10 mm (0.39 in.) or more
z
Specifications for mounting holes and positioning pin holes
Model
Mounting holes
Positioning pin holes
Hole diameter
Nominal
size
Tightening torque
Pin hole diameter
Pin hole depth
DGB85
ø6.5 mm (ø0.26 in.)
M6
6 N·m (53 lb-in)
ø5
+ 0.012
0
mm
(ø0.1969
+ 0.0005
0
in.)
5 mm (0.20 in.),
Blind hole
DGB130
ø9 mm (ø0.35 in.)
M8
13 N·m (115 lb-in)
z
Position of positioning pin holes (when viewed from the opposite side to the output table)
Pin hole (Elongated hole)
Width 5
+ 0.012
0
mm
(Width 0.1969
+ 0.0005
0
in.)
Pin hole
