Installation
19
z
Installation method
This figure shows the
DGM60-AZAK
.
1. Pass the motor/encoder lead wires through the through hole of the mounting plate.
Positioning pins
Screw hole machining
in a mounting plate
Through hole
Motor/encoder lead wires
2. Move the actuator to the through hole which diameter is larger, and secure the mounting holes with screws
(two pieces).
Screws
Spring washers
Mounting holes (2 places)
Positioning pin holes
(2 places)
4-5
Installation method of
DGM85
,
DGM130
, and
DGM200
types
Perform cutout machining or through-hole machining on a mounting plate when installing the actuator.
Use two positioning pin holes when positioning the actuator.
When designing a mounting plate, take into account the shape of the motor.
Values of the tightening torque are recommended. Tighten the screws with a suitable torque according to the design
conditions of the mounting plate.
z
Specifications of mounting plate
Model
Thickness
Material
DGM85
8 mm (0.31 in.) or more
Steel or aluminum
DGM130
10 mm (0.39 in.) or more
DGM200
15 mm (0.59 in.) or more
z
Specifications for mounting hole and positioning pin hole
Model
Mounting hole
Positioning pin hole
Pin hole diameter
Nominal
size
Tightening torque
Pin hole diameter
Pin hole depth
DGM85
ø6.5 mm (ø0.26 in.)
M6
6 N·m (53 lb-in)
ø5
+ 0.012
0
mm
(ø0.1969
+ 0.0005
0
in.)
10.5 mm (0.41 in.),
Through hole
DGM130
ø9 mm (ø0.35 in.)
M8
13 N·m (115 lb-in)
12 mm (0.47 in.),
Through hole
