EN
8
to search for chest belt first. For detailed information or
if encountering difficulties, refer to “Transmission signal”
section above.
START TAKiNg MEASUREMENTS
if using only the stopwatch function:
1. Touch
MODE/-
to select “EXE”, “HR BELT” will be
displayed shortly after to indicate system is searching
for chest belt signal.
2. Touch
ENTER
to skip heart rate signal search, then
+/ST/SP
to start stopwatch.
MODE/-
Enter
START
+/ST/SP
If using chest belt to receive and record fitness data:
1. Touch
MODE/-
to select “EXE”, “HR BELT” will be
displayed shortly after to indicate system is searching
for chest belt signal. Watch will display system used
(analog / digital), then the stopwatch screen.
2. A circle key press prompt will flash to guide you to touch
+/ST/SP
to start stopwatch.
MODE/-
+/ST/SP
START
PAUSE, RESUME / STOP
If you need to take a break during exercise, touch
+/ST/SP
.
When ready, touch
+
/
ST/SP
to resume exercise.
To stop exercise and save data:
Touch
+/ST/SP
to pause,
then touch
MODE/-
.
After a long pause, the watch will time out and automatically
save the data.
SE336_EN_EU_R6.indd 8
24/8/2011 15:52:24