EN
1. Pass the thin loop of the strap through the
camera’s strap ring.
2. Pass the other end of the strap through the
loop.
3. Tighten by pulling the loop.
MEMORY STORAGE
Secure Digital (SD) cards / Multi-Media cards (MMC) are external
memory cards that can be plugged into your digital camera for storing
photos and videos.
1. Turn off the camera.
2. Open battery compartment on the
bottom of the camera.
3. Slide the card into memory slot until it
clicks into position.
4. To remove, push against the card
lodged inside the memory slot. The
card automatically ejects itself out
of the slot.
NOTE:
The SD card / MMC will not insert
fully into the slot if it is facing the wrong way.
Be careful not to apply undue force to the
card.
NOTE:
Do not insert or remove SD card /
MMC while camera is on. You must turn off
the camera when inserting or removing the
card, and then power on after insertion or
removal.
When no more storage space is available, “Memory Full” is shown on
the LCD.
4
ATTACHING THE STRAP
DS9810 EngManl R3 (V2.0) OP
1/7/05, 4:00 PM
5
¶´ƒ
