EN
26
CONNECTING TO EXTERNAL DEVICES
CONNECTING TO A TV
You can playback the photos and videos you have recorded in the
camera on your TV. Connect your camera to the TV with the video
cable (included).
NOTE:
Be sure to adjust the TV Out setting to correspond with your
country's system (PAL / NTSC) before connecting the camera to the TV.
To connect your digital camera to the TV:
1. Turn off the TV and camera before connecting the video cable.
2. Plug the video cable into the camera's video socket.
3. Connect the video cable's yellow connector to the yellow AV
input terminal of your TV.
4. Turn the TV and camera on. Make sure to switch the TV to the
appropriate AV channel display.
NOTE:
The LCD is automatically turned off when the camera is
connected to a TV.
NOTE:
All photos / videos can be viewed in Playback Mode or the
camera can be used as a TV Cam in Capture Mode.
INSTALLING SOFTWARE DRIVERS
(WINDOWS-BASED PC)
Use the USB cable included to connect the camera to your Windows-
based PC. This enables you to transfer, edit, and playback photos
and videos onto your PC.
Users of Windows 98SE-based PCs must install the software first
before connecting the camera to the computer.
To install the software driver:
1. Insert the CD labeled "DS9810" into your CD-ROM drive. The
installation will start automatically.
DS9810 EngManl R3 (V2.0) OP
1/7/05, 4:00 PM
27
¶´ƒ