Orbitalum ORBIMAT 180 SW страница 17 Скачать руководство пользователя | Manualshive

Страница: 17 / 80

background image

ORBIMAT 180 SW

| Operating instructions

Scope of application

(17.09.18) OW_ORBIMAT_180SW_BA_850060202_00_EN

orbitalum tools

GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0

17

4. SCOPE OF APPLICATION

The ORBIMAT 180 SW is characterized by the following scope of application and functions:

•  For welding using the Tungsten Inert Gas (TIG) process
•  Can be used for all materials that are fundamentally suitable for the TIG welding process.
•  Simple and convenient operation thanks to multifunctional rotary knob or touch screen
•  DC current welding source
•  WIDE RANGE input voltages for safe operation of power sets or voltage networks with extreme fluctuations in voltage
•  "Flow Force" function to reduce the gas pre-flow and post-flow time
•  "Permanent gas" function
•  Digital regulation of the weld gas quantity
•  Monitoring of coolant and weld gas
•  Control option for cold wire feed
•  Possibility of connecting an external remote control
•  Constant or pulsed wire feed motion and rotation
•  Optimal visibility and operating conditions thanks to clearly laid-out 12.4" swivel monitor
•  Graphically-supported operating interface and multilingual menu navigation via color display
•  Metric and imperial measuring units
•  Process-oriented, stable and real-time operating system without power-down sequence
•  Automatic weld head recognition and resulting parameter modification
•  Motor current monitoring of the drive motors
•  Capacity to store over 5.000 welding procedures, providing systematic and clear procedure management thanks to

the creation of folder structures

•  Welding data logging and printout of actual values
•  Integrated system printer
•  Possibility of connecting a monitor or printer (through HMDI/USB/LAN)
•  Optional PC software (OrbiProg CA) for welding procedure management and logging
•  Integrated, folding carrying grips
•  Option to program up to 99 sectors
•  Power and motor slope adjustment between the individual sectors
•  Integrated liquid cooling system for cooling the connected weld heads
•  Can only be used in combination with separately available liquid cooling system

4.1

Accessories

Optionally available:

WARNING!

Danger presented by using accessories that have not been approved.

Various injuries and damage to property.

X

Use only original tools, spare parts, materials, and accessories from Orbitalum Tools.

4.1.1

ORBICAR W trolley

Thanks to its integrated liquid cooling function the ORBICAR W trolley
is the perfect supplement to the ORBIMAT 180 SW power source.
Beside the liquid cooling, the trolley is equipped with a practical holder for gas
bottles.

4.1.2

ORBICOOL Active

Very efficient compressor cooling device.
Particularly suitable for welding units in series production.

«
...
15
16
17
18
19
...
»

Содержание ORBIMAT 180 SW

















































































Отзывы:

Нет отзывов

Похожие инструкции для ORBIMAT 180 SW

Бренд: Haas Automation Страницы: 127

Бренд: VATTON Страницы: 20

Бренд: Wacker Neuson Страницы: 30

Бренд: Altronix Страницы: 2

Бренд: Delta Страницы: 15

Бренд: M-system Страницы: 3

Бренд: DUCTMATE Страницы: 12

Бренд: Trotec Страницы: 10

Бренд: Parkside Страницы: 88

Бренд: MasterCraft Страницы: 30

Бренд: Yardworks Страницы: 18

Бренд: Pulsar Страницы: 6

Carlyle TW12RH2

Бренд: Napa Страницы: 12

ROTO-TIGER RT-2000

Бренд: Airtec Страницы: 87

Бренд: TDK-Lambda Страницы: 18

Бренд: Pepe Tools Страницы: 2

ELG-150-C Series

Бренд: Mean Well Страницы: 12

Бренд: Hander Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды