22
P13 Target Distance :
This program counts down the distance goal that the user sets before exercising.
After confirming the program, the user enters the distance goal from 0.50 ~ 99.50
km/mile by using the Speed or I/- keys. Increments are 0.5 kilometers or
miles. Press Enter to confirm and then press Start, the treadmill belt starts and the
user controls the speed and incline. The distance will count down in the Distance
display and until the goal has been reached, “END” will appear on dot matrix and
the treadmill will stop. If the user doesn’t set any goal, it will perform the same
function as Manual program.
P14 Target Calories :
This program counts down the calorie goal that the user sets before exercising.
After confirming the program, the user enters the calorie goal from 10 ~ 9990 kcal
by using the Speed or I/- keys. Increments are 10 kcal. Press Enter to
confirm and then press Start, the treadmill starts and the user controls the speed
and incline. The calorie goal will count down in the Calories display and until the
goal has been reached, “END” will appear on dot matrix and the treadmill will stop.
If the user doesn’t set any goal, it will perform the same function as Manual
program.
P15 Target Time :
This program counts down the time goal that the user sets before exercising. After
confirming the program, the user enters the time goal from 10:00 ~ 99:00 by using
the Speed or I/- keys. Increments are 10 minutes. Press Enter to confirm
and then press Start, the treadmill starts and the user controls the speed and incline.
The time goal will count down in the Time display and until the goal has been
reached, “END” will appear on dot matrix and the treadmill will stop. If the user
doesn’t set any goal, it will perform the same function as Manual program.
P16 Target Elevation Gain :
This program counts down the elevation gain goal that the user sets before
exercising. After confirming the program, the user enters the elevation gain goal
from 10 ~ 9990 meters by using the Speed or I/- keys, the increments are
10 meters. Press Enter to confirm and then press Start, the treadmill starts and
the user controls the speed and incline. The elevation gain goal will count down in
the Elevation Gain display and until the goal has been reached, “END” will appear
on dot matrix and the treadmill will stop. If the user doesn’t set any goal, it will
perform the same function as Manual program.
