42
ERROR
CODE
PROBLEM POSSIBLE
CAUSES
CORRECTION
E3
1. The console
could not obtain
the incline value
within certain
time.
2. The incline
motor is working
outside its
parameters.
1. Data jack has a
poor connection.
2. Incline motor
has become damaged
(internal damage may
be evident by
excessive motor case
heat).
3. Data cable has been
damaged.
4. Controller is burnt.
1. Re-insert the wiring jack and
ensure that a firm connection is
made.
2. Reset the height of the incline
nut and restart the machine.
3. Replace the incline motor.
4. Replace the controller.
E5
No heart rate
signals within 20
seconds when
using Body Fat
program.
1. Misplaced gesture
on hand pulse sensors.
2. Hand pulse
sensors are faulty or
damaged.
1. Try again with
appropriate gesture.
2. Replace the hand pulse
sensors.
Ensure there is adequate clearance between
the incline nut and motor cast.
Replace the incline motor if the associated
fuse blows under constant operation.
Thoroughly inspect the data cable to ensure that
the wiring has not been damaged.
