34
G. Programs:
P1 Manual:
If you select to operate the treadmill in manual mode, press Start directly.
The
treadmill will start at 0.8KPH (0.5MPH) after a 3, 2, 1 countdown. You may then
adjust the speed and incline using the quick keys or the Speed & I/- keys.
P2 - P5 Incline Programs:
(P2 Rolling Hills, P3 Mountain Pass, P4 Mountain Peak, P5 Calorie Burn)
These are incline programs. The incline is preset in each segment, and the speed
is controlled by the user. The incline changes in each minute.
During these programs, the user can increase or decrease the level of the preset
incline value by pressing the I/- keys. Press the I/- keys once to
raise/lower every segment of the incline by 1%, you will see all the segments of the
program raise or lower together. It stops raising or lowering when one of the
segments has reached the maximum or minimum incline level.
P6 - P9 Speed Programs:
(P6 Walking, P7 Walking II, P8 Jogging, P9 Jogging Interval)
These are speed programs. The speed is preset in each segment, and the incline
is controlled by the user. The speed changes in each minute.
During these programs, the user can increase or decrease the level of the preset
speed value by pressing the Speed +/- keys. Press the Speed +/- keys once to
raise/lower every segment of the speed 0.2KPH (0.1MPH), you will see all the
segments of the program raise or lower together. It stops raising or lowering when
one of the segments has reached the maximum or minimum speed level.
P10 - P12 Speed & Incline combination Programs:
(P10 Cardio Burn, P11 Hill Interval, P12 Mountain Interval)
These are speed & incline combination programs. The speed and incline are
preset in each segment.
During these programs, the user can increase or decrease the level of the preset
speed and incline values by pressing the Speed & I/- keys. The dot matrix
only shows the incline level, you will see all the segments raise or lower together
while incline adjusted; and the speed level only shows on Speed display. The
incline and speed stop raising or lowering when one of the segment (speed or
incline level) has reached the maximum or minimum level.
