OPTIMOD-PC INSTALLATION
2-23
A)
Set the AES3 Digital Output sample rate.
[32], [44.1], [48 kHz], [88.2 kHz] or [96 kHz]
48 kHz or 96 kHz are preferred because their samples are synchronous
with the peak-controlled samples in the processing.
Selecting a 32 kHz output sample rate will automatically set the highest
available audio bandwidth to 15 kHz.
S
AMPLING
R
ATE
will also affect the available range of test tone frequen-
cies. When
S
AMPLING
R
ATE
is set to 32 kHz, the highest tone frequency
setting is 15
kHz. When
S
AMPLING
R
ATE
is set to 44.1 or 48 kHz, the tone
frequency range extends to 20 kHz.
This setting does not affect the sample rate being applied to the com-
puter’s WAVE input. Windows sets this rate (via sample rate conversion, if
required) to correctly drive the software receiving OPTIMOD-PC’s WAVE
output stream.
Test tones are not available in the initial release of OPTIMOD-PC soft-
ware. They will be added later.
B)
Set the Digital Output Sync mode to internal or external.
[Internal], [Digital 1 Input], or [Digital 2 Input]
OPTIMOD-PC’s AES3 output has a hardware sample rate converter that
allows the output sample rate to be synchronized to a source.
•
The
I
NTERNAL
sync setting synchronizes the output words at the AES3 out-
put to OPTIMOD-PC’s internal clock.
•
The
E
XTERNAL
setting synchronizes the output rate to the input rate. You
can use either the
D
IGITAL
1
I
NPUT
or the
D
IGITAL
2
I
NPUT
as the sync source.
The same input can also supply audio. If a given input is used
only
as a sync
source, it is wise to check the
M
UTE
box for that input in the Processor mixer
and Direct Mixer.
If a valid AES3 signal is present at the designated sync input, it will be
used for synchronization. If lock is unavailable, OPTIMOD-PC automati-
cally switches to
I
NTERNAL
. OPTIMOD-PC automatically returns to external
sync after one second of continuously valid AES3 signal lock at a valid
sample rate. Furthermore, external lock is only permitted when the out-
put rate matches the sync (or AES3 input) rate.
C)
Set the desired output word length.
[14 bits], [16bits], [18bits], [20bits], and [24bits]
The largest valid word length in OPTIMOD-PC is 24 bits. OPTIMOD-PC can
also truncate its output word length to 20, 18, 16, or 14 bits. If the input
material is insufficiently dithered for these lower word lengths,
OPTIMOD-PC can add dither (see the next step), which is wise if the input
material is insufficiently dithered for these lower word lengths.
D)
Adjust DITHER to on or off, as desired.
Содержание OPTIMOD-PC 1100
