Orban OPTIMOD-PC 1100, Руководство по эксплуатации

Страница: 56 / 166

2-2
INSTALLATION ORBAN MODEL 1100
33MHz, with a transfer rate up to 132MBytes/sec. OPTIMOD-PC will oper-
ate in a 3.3V or 5V PCI slot, and with bus expansion. More than one
OPTIMOD-PC card can be installed in a given host computer.
Remove AC power from the computer. Using proper static control proce-
dures, remove OPTIMOD-PC from its anti-static packaging bag and insert
it in a free PCI slot in your computer.
If you are installing more than one OPTIMOD-PC card, insert all cards at
this time.
The following procedure is different depending on whether you are using Windows
2000 or Windows XP. For OPTIMOD-PC V2, Orban Customer Service does not support
2000, although it will usually work.
1. For Windows 2000 only:
A) Apply power to your computer and let it boot up.
After most of the normal boot process is finished, the “New Hardware
Detected” window will appear.
B) In the New Hardware Detected wizard’s welcoming screen, click “Next.”
Windows will identify the card’s hardware ID as “Optimod1100.”
C) The Wizard asks you if you want it to:
a) Search for a suitable driver, or
b) Display the list of know drivers
Select “Search for a Suitable Driver.”
D) Insert the CDR that was shipped with your OPTIMOD-PC into your computer’s
CD-ROM drive.
A dialog box appears asking you to select optional search locations.
E) Click the “CDR drives” check box and only that box.
F) Select “Next.”
A dialog box appears saying that window has found a driver for the de-
vice. Your CD drive icon should appear on the page.
G) Select “Next.”
A dialog box may appear asking you: “No Microsoft digital signature. Do
you want to continue with this install?”
H) Select “Yes.”
A dialog box appears that says “Completing the New Hardware Found
Wizard.”
I) Select “Finish.”
A dialog box appears asking you if you want to restart your computer.