Orban OPTIMOD-PC 1100, Руководство по эксплуатации

Страница: 101 / 166

OPTIMOD-PC INSTALLATION
2-47
Custom third party applications can be developed to use this protocol. Additionally,
you can include this protocol in an existing application by using small subsets of the
standards-based Telnet/SSH protocols directly, or for simplicity, by using scripting or
by calling batch files with a Telnet/SSH client such as PuTTY along with its compan-
ion command-line interpreter, Plink. Scripting eliminates the need to develop net-
working code or otherwise contend with complex, limited-function Microsoft Win-
dows specific programming APIs, like the Windows Audio Mixer. Developing a third
party application or including the protocol in an existing application eliminates hav-
ing to install and configure additional applications. Using small subsets of the stan-
dards-based Telnet/SSH protocol allows more operational flexibility without a sys-
tem performance hit and simplifies development compared to proprietary OEM
APIs.
Commands are case-sensitive and must be entered exactly as shown. Replace
“[password]” with the actual password of the card being addressed. If there is no
password assigned to the card, omit the brackets [] shown in the examples.
Table 2-2 describes the available command strings and their functions. To demon-
strate this functionality, you may type the commands directly into a Telnet/SSH cli-
ent terminal and see OPTIMOD-PC confirmation and status messages.
Command Values Function
DOSR
32kHz, 44.1kHz, 48kHz, 88.2kHz,
96kHz Digital Output Sample Rate
DOS Int, D1, D2
Digital Output Sync Source
DOF AES, SPDIF Digital Output Format
AIRL +4dB, –10dB Analog Input Ref Level
APOL +4dB, –10dB Analog Proc Output Level
AGC Enabled, Disabled AGC
APIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps) Analog Processed Mixer Input Level
D1PIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps) Digital 1 Processed Mixer Input Level
D2PIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps) Digital 2 Processed Mixer Input Level
WPIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps)
Wave Processed Mixer Input Level
AUIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps)
Analog Unprocessed Mixer Input Level
D1UIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps) Digital 1 Unprocessed Mixer Input Level
D2UIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps) Digital 2 Unprocessed Mixer Input Level
WUIL
–Inf, –40.0dB to 0.0dB
(in 0.1dB steps) Wave Unprocessed Mixer Input Level
APIM Mute, Unmute Analog Processed Mixer Input Mute
APIB Mute, Unmute Analog Processed Mixer Backup
D1PIM Mute, Unmute Digital 1 Processed Mixer Input Mute
D2PIM Mute, Unmute Digital 2 Processed Mixer Input Mute
D2IB Mute, Unmute Digital 2 Processed Mixer Backup
WPIM Mute, Unmute Wave Processed Mixer Input Mute
AUIM Mute, Unmute Analog Unprocessed Mixer Input Mute
AUIB Mute, Unmute Analog Unprocessed Mixer Backup