Orban OPTIMOD-PC 1100, Руководство по эксплуатации

Страница: 57 / 166

OPTIMOD-PC INSTALLATION
2-3
J) Select “Yes” to restart your system.
K) (Optional) If you have installed more than one card, Windows will continue to
present “New Hardware Detected” windows until you have installed all cards.
Repeat steps (E) through (J) for each card.
L) Wait until your computer finishes booting.
M) Skip to step 3 on page 2-3.
2. For Windows XP only:
A) Apply power to your computer and let it boot.
After most of the normal boot process is finished, the “New Hardware
Detected” window will appear asking you to insert the OPTIMOD CD-R
and asking you if you want the Wizard to:
a) Install software automatically, or
b) Install from a list or specific location.
B) Insert your OPTIMOD CD-R.
C) Select “Install software automatically.”
D) Select “Next.”
A Hardware installation dialog box will appear warning you that the
software has not passed Windows logo testing.
E) Select “continue anyway.”
A dialog box appears that says, “Completing the New Hardware Found
Wizard.”
F) Select “Finish.”
G) (Optional) If you have installed more than one card, Windows will continue to
present “New Hardware Detected” windows until you have installed all cards.
Repeat steps (C) through (F) for each card.
3. For both Windows 2000 and XP:
A) Navigate to Start/Run on your computer. In the Run dialog box, type
x:setup
,
where “x” is the drive letter of your CD-ROM drive, and click “OK.”
This will install Orban’s control and server software on your computer.
The server runs as a Windows service, and will automatically run at boot
time.
B) Answer the questions when prompted by the Orban installer.
The installer will allow you to create a desktop icon pointing to the
OPTIMOD-PC control application and will allow you to create an “agent”
in the System Tray that launches the OPTIMOD-PC control application via
a single click.