Orban OPTIMOD 8685, Руководство по эксплуатации, Страница: 207 / 357

OPTIMOD SURROUND PROCESSOR OPERATION
3-63
If your setting of a given
D
ELTA
R
ELEASE
control would otherwise create a release
slower than “slow” or faster than “fast” (the two end-stops of the
M
ULTIBAND
R
ELEASE
control), the band in question will instead set its release time at the appro-
priate end-stop.
B1>LFE Couple See Bass>LFE Couple on page 3-52.
B1-B5 Compression Ratio : See page 3-53.
Note that the multiband gate only works appropriately when the
K
NEE
and
R
ATIO
controls of all bands are set identically, which is typically the case in broadcast appli-
cations. We recommend turning off the multiband gate if the individual
K
NEE
and
R
ATIO
settings are unequal.
B1-B5 Knee : See page 3-53.
B1-B5 Breakpoint : See page 3-53.
B1/B2 Crossover (Band 1 to Band 2 Crossover Frequency) sets the crossover fre-
quency between bands 1 and 2 to either 100 Hz or 200 Hz. It significantly affects the
bass texture, and the best way to understand the differences between the two
crossover frequencies is to listen.
B1-B5 Main>Center Max +Delta GR; B1-B5 Main>Center Max –Delta GR : See
Multiband starting on page 3-11 for an explanation of these controls.