Orban OPTIMOD 8685, Руководство по эксплуатации, Страница: 102 / 357

2-48
INSTALLATION ORBAN MODEL 8685
tered, the 8685 will ignore the command.
•
You can apply this command anytime after the 8685 boots up. The 30-minute
timeout does not apply.
•
This command is useful in interfacing automation systems to the 8685.
2. To recall a Setup:
Command Response
RS XXXXXXX[PASSCODE]
«
(valid passcode and Setup name)
ON AIR: XXXXXXX
(invalid passcode)
[no error message is issued]
In the above table:
XXXXXXX
= the Setup name;
PASSCODE
= any valid passcode.
•
If a non-existent Setup name, control value, and/or an invalid passcode is en-
tered, the 8685 will ignore the command.
•
You can apply this command anytime after the 8685 boots up. The 30-minute
timeout does not apply.
•
This command is useful in interfacing automation systems to the 8685.
3. To restore factory defaults:
Command Response
RESTORE FACTORY DEFAULTS
«
Are you sure (yes/no)?
«
YES
«
(factory defaults restored)
Restored
«
NO
«
(or any response other than
YES
«
”)
(abort)
Defaults not restored
«
To protect against accidental loss of settings, you must enter the entire com-
mand string and a “YES” response in uppercase.
Restoring factory defaults does the following:
•
Deletes all User Presets
•
Resets all global parameters to factory default settings
•
Deletes all Automation Events
•
Restores Remote Interface inputs 1-8 to “no function”