Orava ZE-302, Инструкция по эксплуатации

Страница: 16 / 19

16
EN
Anti-drip system
• The Anti-drip system (or also Drip Stop) function prevents liquids
from dripping, which occurs with steam irons when ironing at a lower
temperature. This function stops the generation of steam at a lower
temperature, thus preventing liquid from fl owing out of the ironing
surface.
Anti-calc system
• The appliance is equipped with a permanent Anti-Calc fi lter, which
reduces the formation of calcium deposits inside the iron. This fi lter
cannot be selected. The effectiveness of the fi lter depends on the
hardness of the water you use.
Auto-shut off function
• The iron switches off automatically if you leave it for 8 minutes without
moving when it is in a vertical position, or after 30 seconds without
moving it in a horizontal position. The device beeps and fl ashes to
indicate that it is switching off automatically.
• When you want to switch the iron on again, just move the iron. The
green auto power off light turns off. The red temperature light comes on.
When the red temperature light goes out and comes on again, the iron
is ready for reuse.
Warning!
• Although the iron is equipped with an automatic shut - off function, for
safety reasons, never leave it unattended when it is connected to the
mains.
Tips for ironing
- Always check the label on the ironing cloth, which also contains ironing
instructions. Always follow these guidelines.
- The iron heats up faster than it cools. Therefore, start by ironing textiles
requiring lower ironing temperatures that contain synthetic fabrics.
- If textiles contain different types of fi bers, always set the ironing
temperature according to the fi bers that are most sensitive to
temperature.
- Silk and other glossy textiles iron on the opposite side. To avoid it
to damage, ironing silk and other fi ne textiles do not use spraying.
- Warm it and similar fi ne fi ber fabrics iron it in just one direction. Apply
gentle pressure and always follow the movement of the iron.