Orava ZE-302, Инструкция по эксплуатации

Страница: 15 / 19

15
EN
Steaming
• If you want to iron with steam, the water tank
13
must be fi lled with
water and the temperature must be set to • • • to MAX.
• Move the steam control 4 to the right or left to increase the steam
output and vice versa. Set the steam control 4 to the middle to
switch off steaming.
Steam impact
• Press the steam boost button
6
to generate a strong stream of steam
that straightens stubborn creases and folds in the fabric.
• If steam blasts are to be used, the water tank 13 must be fi lled with
water and the temperature must be set to • • • to MAX. If the control
indicator
9
lights up, wait until it goes out before pressing button
6
again.
• Wait at least 5 seconds before using the steam boost again.
• You can also use the steam boost in a vertical position (eg on curtains,
hanging clothes, etc.).
Sprinkling (spraying)
• You can use water sprinkling at any ironing temperature.
• If you want to iron with steam, the water tank 13 must be fi lled with
water.
• To sprinkle the fabric from nozzle
2
, press button
5
. If you are using
sprinkling for the fi rst time or have not used sprinkling for a long time,
press button 5 several times until nozzle 2 starts working properly.
Note
We do not recommend using sprinkling on silk and synthetic fabrics.