Orava ZE-302, Инструкция по эксплуатации

Страница: 4 / 19

4
EN
Operating environment characteristics:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence
of water vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignifi cant
6. Protection degree: min. IP20 (device protected from touching
dangerous parts by hand and non-waterproof)
• This degree of protection is not indicated on the product and on the
technical parameters in the operating instructions.
• If the protection class of the product is different from IPX0, this is then
displayed on the device label, if applicable
in the technical parameters of the operating instructions.
• Other characteristics of the domestic operating environment
(mechanical stress - vibrations, occurrence of plant, animals, weather
effects ...) are negligible in terms of effect on the correct and safe use of
electrical equipment.
1.3 Electrical safety
• Before connecting the appliance to the power supply for the fi rst time,
make sure that the voltage on the appliance label corresponds to that of
the household electrical outlet.
• The electric appliance is designed to power from 1 / N / PE ~ 230V 50 Hz.
• The electrical safety of the appliance is guaranteed only if it is properly
connected to the mains.
• Electrical protection class I is equipped with a protection against
electric shock by means of protective earthing of inanimate parts,
which can become dangerous when the device is malfunctioning.
Always connect such devices to properly installed mains sockets that
are equipped with earthing conductors and have a properly grounded
earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
• Class II electrical equipment is protected against electric shock by
double insulation or by enhanced insulation of hazardous live electrical
parts. Protection class device II must not be equipped with means for
connecting a protective earthing.
All electrical equipment is equipped with two-wire power supply.
• Class III electrical equipment is a device that is powered by a low
voltage (battery or accumulator) source, and does not pose any danger
to the user from electrical shock.