Orava ZE-302, Инструкция по эксплуатации

Страница: 5 / 19

5
EN
• To ensure increased security against the risk of electrical shock when
using electrical appliances by laypersons, it is recommended to install
them in the electrical supply circuit for sockets with a rated current not
exceeding 20 A current protector (RCD) with a rated trip current not
exceeding 30 mA.
To ensure the safety and correctness of the electrical installation,
consult a qualifi ed electrician.
• Only use a power cord with a plug (mains lead) supplied with the
device and compatible with a wall outlet. Using another cable may
result in fi re or electric shock.
• Always connect an electrical appliance to an easily accessible mains
socket. In the event of an operating fault, the appliance must be
switched off as soon as possible and disconnected from mains supply.
• The power cord and mains plug must always be easily accessible for
safe disconnection of the electrical appliance from the power supply.
• Do not pull the power cord by pulling on the cord . Disconnect the
power cord by pulling the plug behind the power cord / power cord plug.
• If you use an extension cord, make sure that the total rated power of
all devices connected to the extension cord does not exceed the max.
current load of the extension cable.
• If you need to use an extension cord or power supply block, make sure
that the extension cord or power pack is plugged into a power outlet,
and not to another extension cord or power supply. The extension
power cord or power supply block must be designed for grounded
electrical plugs and connected to a properly grounded electrical outlet.
• The power plug of the appliance must be compatible with the mains
socket. Never use any adapters or modify the socket in any other way.
Do not use inappropriate or damaged sockets!
• To avoid electrical shock, plug the power cables into properly grounded
electrical outlets. If the device is equipped with a 3-pole plug, do not
use adapters that do not have a grounding element or remove the
grounding element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord / power cord of
the appliance to mechanical stress or external heat sources. Damage
to the power cord may result in electric shock.
• When the power cord is damaged, disconnect the appliance from the
mains and do not use it again.
• If the power cord is damaged, it must be replaced by the manufacturer,
its service department or a similarly qualifi ed person to avoid the risk of
electric shock.
• Regularly check and maintain the electrical appliance as well as the
power cord and power outlet. Disconnect the power plug regularly and
clean it if necessary. Pollution by dust or other substances may cause
disruption of the insulating state and consequently fi re.