Verify Card Status
Verify Card Status
To assess if the Sun Flash Accelerator F80 PCIe Card is ready to be used:
1.
Run the
ddcli
utility.
See
“Access Text Menu Interface in
2.
List card information.
■
Select 1 in text interface. or:
■
Type
ddcli -listall
See
3.
Display card health.
■
Select 3 in text interface. or:
■
Type ddcli
-health
See
“Health Reporting Command” on page 44
Related Information
■
Utility Command Summary” on page 38
ddcli
Utility Command Summary
The following table lists all of the user commands supported by the
ddcli
utility. The sections
following the table provide detailed descriptions of each command in the
ddcli
utility.
Command
Action
-listall
Display information about the cards in the system. You do not need to select card number
(-c).
-list
List all information about the selected cards.
-updatepkg
Update card firmware with the flash package.
-health
Display the health of the selected card.
-locate
Locate the selected card in the system.
38
Sun Flash Accelerator F80 PCIe Card User's Guide • December 2013