Oracle SPARC T8-1, Руководство по обслуживанию

Страница: 31 / 168

Interpreting LEDs
No. LED Icon or Label Description
3 Locate indicator and button
(white)
Turn on the Locate indicator by pressing the Locator button, or see
“Locate the Server” on page 43 . When lit, the LED blinks rapidly.
The blinking will time out after 15 minutes.
4 Service Required LED
(amber)
The
fmadm faulty
command provides details about any
faults that cause this indicator to light. See “Identify Faulted
Components” on page 23 .
Under some fault conditions, individual component fault LEDs are lit
in addition to the Service Required LED.
5 System OK indicator (green) Indicates these conditions:
■
Off
– Server is not running in its normal state. Server power might
be off. The SPM might be running.
■
Steady on
– Server is powered on and is running in its normal
operating state. No service actions are required.
■ Slow blink – Server is running in standby mode and can be quickly
returned to full function.
■ Fast blink – A normal but transitory activity is taking place. Fast
blinking might indicate that server diagnostics are running or that
the server is booting.
6 Host Ethernet Port Link/
Activity LED (green)
From left to right, NET 1,
NET 0, NET 3, and NET 2.
Indicates these conditions:
■
Off
– No link is established.
■ Steady On – A link is established.
■
Blinking
– A link is established, and there is activity on the port.
7 NET MGT Port Link and
Activity LED (green on left)
NET MGT Port Speed LED
(green on right)
LINK/ACT
SPD
Indicates these conditions:
■ Off – No link is established.
■
Steady On
– A link is established.
■ Blinking – A link is established and there is activity on the port.
Indicates these conditions:
■ Off – The link is operating as a 10 Mbps connection.
■ Steady On – The link is operating as a 100 Mbps connection.
Related Information
■
“Front Panel Controls and LEDs” on page 28
■
“Checking for Faults” on page 21
Detecting and Managing Faults 31