Oracle SG-SAS6-INT-Z, Руководство по установке

Страница: 17 / 80

2
♦ ♦ ♦ C H A P T E R 2
Hardware Installation and Removal
This chapter explains how to install and remove the HBA. For detailed instructions, see your
system installation or service manual and the installation manual for the storage devices to be
connected to the HBA.
This chapter contains the following topics:
■
“Observing ESD and Handling Precautions” on page 17
■
“Installing the HBA” on page 18
■
“Next Steps” on page 22
■
“Removing the HBA” on page 23
Observing ESD and Handling Precautions
Caution -
Damage to the HBA can occur as the result of careless handling or electrostatic
discharge (ESD). Always handle the HBA with care to avoid damage to electrostatic-sensitive
components.
To minimize the possibility of ESD-related damage, use both a workstation antistatic mat and
an ESD wrist strap. You can get an ESD wrist strap from any reputable electronics store or from
Oracle as part number #250-1007.
Observe the following precautions to avoid ESD-related problems:
■
Leave the HBA in its antistatic bag until you are ready to install it in the system.
■
Always use a properly fitted and grounded wrist strap or other suitable ESD protection
when handling the HBA and observe proper ESD grounding techniques.
■
Always hold the HBA by the metal enclosure.
■
Place the HBA on a properly grounded antistatic work surface pad when it is out of its
protective antistatic bag.
Chapter 2 • Hardware Installation and Removal 17