manualshive.com logo in svg

Oracle SG-SAS6-INT-Z, Руководство по установке, Страница: 15 / 80

Поделиться
Скачать
Oracle SG-SAS6-INT-Z Скачать руководство пользователя страница 15

Boot Support

Platform

Supported OS/Technology

SPARC T3-2

Oracle Solaris

SPARC T4-2

Oracle Solaris

Oracle x86 Servers

Sun Fire X4170 M2

Oracle Solaris, Linux, VMware, Virtual Machine, and Windows

Sun Fire X4270 M2

Oracle Solaris, Linux, VMware, Virtual Machine, and Windows

Sun Fire X4470

Oracle Solaris, Linux, VMware, Virtual Machine, and Windows

Sun Server X2-4

Oracle Solaris, Linux, VMware, Virtual Machine, and Windows

Sun Server X3-2

Oracle Solaris, Linux, VMware, Virtual Machine, and Windows

Sun Server X3-2L

Oracle Solaris, Linus, VMware, Virtual Machine, and Windows

Sun Server X4-2

Oracle Solaris, Linux, VMware, Virtual Machine, and Windows

Sun Server X4-2L

Oracle Solaris, Linux, VMware, Virtual Machine, and Windows

Storage System Support

Internal disk drives are the only storage supported by the HBA.

Software Support

Install, Flash, and BIOS configuration utilities are provided. The HBA uses the Fusion-

MPT architecture for all major operating systems, which allows for thinner drivers for better

performance. To obtain the most up-to-date device drivers, firmware, and boot code that support

your operating system, go to: 

http://www.lsi.com/sep/Pages/oracle/index.aspx

Boot Support

Booting through the HBA is supported in the following operating system and technology

environments:

■

Oracle Solaris 10 01/13 OS for the SPARC and x86 platforms

■

Oracle Solaris 10 11.1 OS for the SPARC and x86 platforms

■

RHEL 5.9 and 6.4 OSes

■

SLES 11 SP2 OS

■

Oracle Linux 5.9 and 6.4 OSes

■

Oracle VM 3.2.1 OS

■

Windows Server 2008 R2 including SP1 OS

Chapter 1 • HBA Overview

15

Содержание SG-SAS6-INT-Z

















































































Отзывы:

Нет отзывов