Oracle Exalogic Elastic Cloud, Руководство пользователя

Страница: 210 / 342

9.
Run the following command to add port GUIDs and BridgeX ports, which you
noted down in Gather Port GUIDs of Compute Nodes and BridgeX Ports of
Gateway Switches , to the
myEoIB
partition:
# smpartition add -n myEoIB -port port_guid1 port_guid2 bridgex_port1
bridgex_port2
Where
port_guid1
,
port_guid2
,
bridgex_port1
, and
bridgex_port2
are
the ports that you want to add to the partition. This command example shows a
few port entries only. You can add as many ports as necessary. An example port
value is
0021280001cef8e3
.
10.
Run the following command to view the changed partition configuration:
# smpartition list modified
This command displays the new partition with its
pkey
, ports added to the
partition, and membership type.
11.
Run the following command to confirm the partition configuration:
# smpartition commit
The
myEoIB
partition with
0x005 pkey
is created.
12.
Log in to the gateway switch interface as
root
, and run the following commands:
# createvlan 1A-ETH-3 -vlan 10 -pkey 0x005
Where
1A-ETH-3
is the Ethernet connector on the gateway switch,
10
is the
VLAN identifier, and
0x005
is the partition key that you created earlier.
13.
To verify, run the following command:
# showvlan
The following information is displayed:
Connector/LAG VLN PKEY
-------------- --- -----
1A-ETH-3 10 0x005
0A-ETH-1 11 ffff
14.
As
root
, log in to
el01gw04
that you identified in Step 4 . Use its IP address or
host name to log in.
15.
Upon login, run the following command to create a VNIC:
# createvnic 1A-ETH-3 -GUID 00212856d0a2c0a0 -mac a2:c0:a0:a8:01:01 -vlan 10 -
pkey 0x005
Where
1A-ETH-3
is the Ethernet connector,
00:21:28:56:d0:a2:c0:a0
is the
GUID,
a2:c0:a0:a8:01:01
is the dummy MAC address defined in Step 4 ,
10
is
the VLAN identifier, and
0x005
is the partition key that you created earlier.
This example creates a VNIC, such as
eth4
(on Oracle Linux) or
eoib0
(on
Oracle Solaris) associated with VLAN
10
associated with a partition with
0x005
as the
pkey
.
16.
Run the following command to verify the VNICs:
# showvnics
Create a Partition for EoIB and Associating the pkey with a VNIC and VLAN
16-12 Oracle Exalogic Elastic Cloud Machine Owner's Guide