Oracle Exalogic Elastic Cloud, Руководство пользователя

Страница: 147 / 342

10.3 Set Up Ethernet Over InfiniBand (EoIB) on Oracle Solaris
This section includes the following procedures to set up EoIB on Oracle Solaris:
• Set Up Ethernet Over InfiniBand on Oracle Solaris 11.1
• Set Up Ethernet Over InfiniBand on Oracle Solaris 11.2
10.3.1 Set Up Ethernet Over InfiniBand on Oracle Solaris 11.1
You can set up Ethernet over InfiniBand connectivity for Exalogic compute nodes
running Oracle Solaris 11.1 by doing the following:
1.
Use an SSH client, such as PuTTY, to log in to a Sun Network QDR InfiniBand
Gateway Switch as a
root
. For example, log in to
el01gw04
as
root
.
2.
At the command prompt, run the following command:
el01gw04# listlinkup | grep Bridge
A section of the output of this command is as follows:
Connector 0A-ETH Present
Bridge-0 Port 0A-ETH-1 (Bridge-0-2) up (Enabled)
Bridge-0 Port 0A-ETH-2 (Bridge-0-2) up (Enabled)
Bridge-0 Port 0A-ETH-3 (Bridge-0-1) up (Enabled)
Bridge-0 Port 0A-ETH-4 (Bridge-0-1) up (Enabled)
Bridge-0 Port 1A-ETH-1 (Bridge-1-2) down (Enabled)
Bridge-0 Port 1A-ETH-2 (Bridge-1-2) down (Enabled)
Bridge-0 Port 1A-ETH-3 (Bridge-1-1) up (Enabled)
Bridge-0 Port 1A-ETH-4 (Bridge-1-1) up (Enabled)
From this example, identify the uplinks. In this example, you can use any of the
following Ethernet connectors for creating a VNIC:
•
0A-ETH-1
•
0A-ETH-2
•
0A-ETH-3
•
0A-ETH-4
•
1A-ETH-3
•
1A-ETH-4
Note:
This example procedure uses
1A-ETH-3
.
3.
Determine GUIDs of an Exalogic compute node as follows:
a.
On the compute node that requires the VNIC, log in as
root
, and run the
dladm show-ib
command on the command line. For example, log in to
el01cn02
as
root
. This command displays port information, as in the
following example output:
Set Up Ethernet Over InfiniBand (EoIB) on Oracle Solaris
Configure Ethernet Over InfiniBand 10-7