Oracle Exalogic Elastic Cloud, Руководство пользователя

Страница: 161 / 342

• step 17 in Set Up Ethernet Over InfiniBand on Oracle Solaris 11.1 .
• second command in step 10 in Set Up Ethernet Over InfiniBand on Oracle
Solaris 11.2
4.
Run the following command on the gateway switch CLI, as root, to verify the
VNICs:
# showvnics
The following message is displayed:
ID STATE FLG IOA_GUID NODE IID MAC VLN PKEY GW
--- -------- --- ----------------------- ---------- ---- -------------
0 UP N 00:21:28:00:01:A0:A6:95 computenode1 EL-C 192.168.10.29
0000 62:C0:A0:A8:01:05 NO ffff 1A-ETH-3
1 UP H 00:21:28:00:01:A0:A6:95 computenode1 EL-C 192.168.10.29
8001 62:C0:A0:A8:01:02 10 ffff 1A-ETH-3
2 UP H 00:21:28:00:01:A0:A6:95 computenode1 EL-C 192.168.10.29
8002 62:C0:A0:A8:01:03 11 ffff 1A-ETH-3
Note that the VNIC with ID
0
corresponds to an already created network-
administered VNIC (created using the steps described in Set Up Ethernet Over
InfiniBand (EoIB) on Oracle Solaris ). The two new host-administered interfaces are
the ones with IDs
1
and
2
(with VLANs
10
and
11
, respectively).
Tip:
After creating the interfaces, you can run the
dladm
command to verify the
MAC address on the compute node. For example, to verify the new interface
and its MAC address, run one of the following commands on the Oracle
Solaris compute node for which the VNIC was created:
# dladm show-vnic eoib0_v10
The output of this command shows the MAC address, which is the MAC
address you defined for the VNIC.
5.
If you want to configure the VNIC interfaces in an IPMP group on Oracle Solaris,
for high availability purposes, perform on of the following procedures depending
on the OS version:
• step 18 in Set Up Ethernet Over InfiniBand on Oracle Solaris 11.1 .
• step 14 in Set Up Ethernet Over InfiniBand on Oracle Solaris 11.2
Oracle Solaris: Creating VNICs and Associating Them with VLANs
Set Up Virtual LANs 11-5