AO SERIES | INSTRUCTIONS MANUAL
44
7. Product warranty
7.1 Warranty
The device warranty is 12 months from the effective delivery date with reference to the
device serial number.
The warranty covers the replacement or repairs of the defective part (components,
device or part of it) with the exclusion of dismantling and shipping costs.
The replacement of one or more components does not renew the warranty period of
the entire device. The manufacturer cannot be held liable for any compensation for
whatever reason and the buyer renounces any claims for costs or damages to third
parties due to any machine downtime.
The electronics and parts subjected to normal use or deterioration due to atmospheric
agents and the external environment are excluded from the warranty. Also, all failure
caused by the lack of, insufficient or incorrect maintenance performed by unskilled
or unauthorized personnel or due to unintended use or unauthorized replacements,
alterations or repairs is excluded from the warranty.
The general validity of the warranty depends on:
➝
Maintenance being performed correctly as described in the device manual;
➝
The intended use of the device as specified in this manual.
7.2 Applied directives
Opto Engineering srl, with registered office in Strada Circonvallazione sud 15, 46100
Mantova (Mn), Italy, states that the products described in this manual conform to the
following EU directives:
➝
2014/30/EU (EMC) following which all the following regulations and/or technical
specification have been applied:
EN 61326-1:2013
Electrical equipment for measurement,
control and laboratory use - EMC requirements Part 1: General requirements
EN 55011:2009
Industrial, scientific and medical (ISM) radio-frequency equipment
Radio disturbance characteristics - Limits and methods of measurement
EN 61000-4-2:2009
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques
Section 2: Electrostatic discharge immunity test - Basic EMC publication
EN 61000-4-3:2006
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques
- Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4:2004
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques
Section 4: Fast transients / burst immunity test
EN 61000-4-6:2009
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques
Section 6: Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-8:2010
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques
Section 8: Power frequency magnetic field immunity test
➝
2011/65/CE (ROHS).
