opto engineering AO series, Инструкция по эксплуатации

Страница: 27 / 46

AO SERIES | INSTRUCTIONS MANUAL
27
Allowed values:
Value Input Range
Focus value (%) 0-100
Memory Position (#) 1-5
Rest Time (ms) 10-10000
Trigger Width 1-1000
Memory Positions (EEPROM)
Error list:
OK All
1 Error Write All Communication error
2 Error Read All Communication error
3 Error Parsing All Communication error
4 Error Socket All Communication error
5 Error invalid ok All Communication error
10 Error Voltage range
Set_Voltage
Check Focus Value
Set_Position
20 Generic error
Set_Voltage focusValue != currentFocusValue
Set_Position
heck Memory Position Value Get_Position
Reset_Position
Start_Loop Check Rest Time Value
Set_TriggerWidth Check Trigger Width Value
Set_DeviceIP Check if new IP is valid
Set_PosMemory Check Memory Position Value
Get_PosMemory Check Memory Position Value
Recall_PosMemory Check Memory Position Value
30 Error Setting
Enable_Control Error during activation
Disable_Control Error during deactivation
40
Error Invalid
Operation
Set_Voltage Control is not enabled
Start_Loop Control is not enabled