AO SERIES | INSTRUCTIONS MANUAL
17
PC
Ethernet Port
CAMERA
Trigger IN
MOVE/STOP
POWER SUPPLY
24 V
GND
CAMERA
CAMERA POWER SUPPLY
Example 4:
AOL0223X is connected to the power supply, to the camera and to the PC.
The communication is based on TCP/IP protocol through Ethernet to the PC.
In this case an analog control (described in Paragraph 11.6) is implemented to find the
best focus: the analog signal coming from the camera or from an external source is fed
to the input of the AOL0223X.
The output signal (OPTOISOLATED) is used to trigger the image acquisition. Please refer
to the previous example for configuring the optoisolated output signal.
3. Storage and use
3.1 Storage conditions
3.1.1 Temperature
Storage environment between 0° and 50° C. Avoid thermal shock by not exposing the
product to sudden changes in temperature.
3.1.2 Humidity
Store the product in a dry place: storage environment with relative humidity (RH) less
than 85% (no condensation).
3.1.3 Vibration and positioning
Always handle the product with care. Store the product in a safe place inside its original
packing material.
3.2 Working conditions
3.2.1 Temperature
Operating environment between 5° and 45° C.
Extreme temperatures affect the functionality of the product, especially the electronic
components.
Avoid thermal shock by not exposing the product to sudden changes in temperature.
Since the product includes electronic components, it may generate heat when
functioning. Always allow enough room to dissipate the appropriate amount of heat
(if necessary operating, by forcing the air).
