OPTO 22 GROOV BOX, Руководство пользователя

Страница: 40 / 75

CHAPTER 3: USING GROOV ADMIN
groov Box User’s Guide
33
33
4. Click Choose File and locate the update file you downloaded. Highlight the file, and click Open.
5. Click Update.
The application file is downloaded and installed. The update process may take several
minutes . It may not look like anything is happening, but it is. Be patient and don’t click away
from this page until you see the success message:
NOTE: Your groov Box must be restarted for the update to take effect. While the groov Box is restarting,
all of your users will be disconnected, and you will not be able to continue working in groov.
6. When the success message appears, click “Click here to restart now” or click Back to restart later.
(To restart later, see
“Restarting the groov Box,” below.)
During the restart, you’ll notice the LED lights on the groov Box go off and then come back on.
You and your users will be able to use groov View and groov Build once the groov Box has fully
restarted and the SYS LED has stopped flashing.
Restarting the groov Box
While the groov Box is restarting, all users are disconnected, and you won’t be able to continue
working in groov Build. The groov Box must be restarted in order for updates to take effect.
To restart the groov Box, do one of the following:
After updating groov Admin, click the message “Click here to restart now.”