OPTO 22 GROOV BOX, Руководство пользователя

Страница: 30 / 75

CHAPTER 3: USING GROOV ADMIN
groov Box User’s Guide
23
23
2. Click the wired Ethernet connection you want to configure.
NOTE: Use ETH0 as the main network connection. Only use ETH1 if you have segmented networks.
3. Select Static configuration. Enter the static IP Address and Netmask.
4. Click Save.
Changing the Hostname, DNS Servers, or IPv4 Gateway
In order to identify the groov Box more easily on the network, you might want to change the
hostname from the default. And, depending on your network setup, you might need to change the
DNS Servers or IPv4 Gateway.
NOTE: Keep in mind that any changes to this interface may make your system inaccessible via your current
wired or wireless connection. Be sure to write down the new hostname or other changes.
1.
In the left navigation bar choose Networking > Network Configuration, or click the Configure
Network Interfaces button in Quick Start.
The Network Configuration page opens.
Static IP address
OR: