CHAPTER 3: USING GROOV ADMIN
groov
Box User’s Guide
25
25
2.
Click ETH1.
3.
If the network has DNS and DHCP, select “From DHCP.” If it doesn’t, enter a static IP Address and
Netmask.
NOTE: If you are using static addresses, ETH1 must be on a different subnet than ETH0.
4.
Click Save.
Configuring Wireless Communications
You can configure the
groov
Box to connect to a wireless network through an access point using the
802.11b, 802.11g, and 802.11n protocols.
Before you begin, get the following information from your IT Department:
SSID
—Name of the wireless network access point you want the
groov
Box to join
Security
—Encryption type (WPA or WPA2), network key input type (hex or ASCII), and password
Password
—To access the wireless network
1.
With the
groov
Box connected via ETH0, in groov Admin’s left navigation bar choose
Networking > Network Configuration, or click the Configure Network Interfaces button in
Quick Start.
OR:
Содержание GROOV BOX
