OPTIMUM
M A S C H I N E N - G E R M A N Y
Unpacking and connecting
Version 1.1.5 dated 2015-08-31
Page 25
Original operating instructions
BF30Vario
GB
3.5.4 Warming up the machine
ATTENTION!
If the drilling-milling machine and in particular the milling spindle is immediately
operated at maximum load when it is cold it may result in damages.
If the machine is cold such as e.g. directly after having transported the machine it should be
warmed up at a spindle speed of only 500 1/min for the first 30 minutes.
3.6
Optionally available accessories
Designation
Item number
machine base
Dimensions of packaging (L x W x H) 650 x 550 x
750
3338430404
Vice FMS 125
3355127
Hydraulic vice HMS 125
335 2044
Kit of parallel spacers 18 pcs
3354000
Universal coolant equipment 230 V
3352002
Universal coolant equipment 400 V
3352001
Levelling- damping element SE1
Levelling- damping element SE2
3381012
3381016
Milling cutter kit HSS 20 pcs
3386200
Collet chucks kit direct clamping MT 3
3352014
Draw-in collet chucks kit MT 3
3352050
Cutter head for copy and surface milling MT 3
3350213
Height-adjustable tailstock RST 1
3356155
Horicontal-vertical circular dividing table RT 150
3356150
