OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.1.5 dated 2015-08-31
Page 13
Original operating instructions
BF30Vario
GB
Activate the emergency stop impact switch only in case of danger! If this push button is
actuated in order to switch off the drilling-milling machine in the standard operation the
tool or workpiece might get damaged.
After having actuated the EMERGENCY STOP, turn the knob of the particular push button to
the right in order to restart the machine.
1.9.2 Lockable main switch
In the position " 0 " the lockable main
switch can be secured against accidental
or non-authorized switching-on by means
of a padlock.
When the main switch is switched-off, the
current supply is interrupted.
Except for the areas marked by the picto-
gram in the margin.
Img.1-3:
Main switch
WARNING!
Dangerous voltage even if the main switch is switched-off. In the areas marked by the
ideogram in the margin, there might be voltage, even if the main switch is switched off.
1.9.3 Protective cover
The drilling / milling head is equipped
with a protective cover.
WARNING!
Only remove the protective cover
when the mains plug of the drilling-
milling machine is disconnected.
Img.1-4:
Protective cover
Main switch
Protective cover
