OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.0.2 2014-11-04
Page 13
Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order.
- Disconnect all poles.
- Secure against switching on.
- Check if the machine is zero potential.
1.6
Operator positions
The operator’s position is in front of the drilling machine.
INFORMATION
The mains plug of the drilling machine has to be freely accessible.
1.7
Safety measures during operation
CAUTION!
Risk by inhaling health hazardous dusts and fogs.
Depending on the materials which need to be treated and the agents which are used,
dusts and fogs may be generated which endanger your health.
Make sure that the generated health hazardous dusts and fogs are safely sucked-off at
the place of origin and that they are dissipated or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using inflammable materials or cooling-lubricating agents.
Before processing inflammable materials (e.g. aluminium, magnesium) or using
inflammable auxiliary materials (e.g. spirit) it is necessary to take additional preventive
measures in order to safely avoid health risks.
1.8
Safety devices
Use the drilling machine only with properly functioning safety devices.
Stop the drilling machine immediately if there is a failure on the safety device or if it is not func-
tioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the drilling machine must only be used if you
have removed the cause of the failure,
have verified that there is no danger resulting for the staff or objects.
WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other staff working with the drilling machine. The possible
consequences are:
injuries may occur due to workpiece or parts of workpieces flying off,
contact with rotating parts,
a fatal electrocution,
The drilling machine machine includes the following safety devices:
an EMERGENCY STOP push button,
a protective cover of the pulleys with positioning switch,
a drill chuck protection with positioning switch,
a drilling table with T-slots to fix the workpiece or a vice.
