OPTIMUM
M A S C H I N E N - G E R M A N Y
Annex
Version 2.0.2 2014-11-04
Page 74
Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
9
Annex
9.1
Copyright
This document is copyright. All derived rights are also reserved, especially those of translation,
re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar means and
recording in data processing systems, neither partial nor total.
Subject to technical changes without notice.
9.2
Terminology/Glossary
9.3
Change information manual
Term
Explanation
Drill sleeve
Fixed hollow shaft in which the drilling spindle turns
Drilling spindle
Shaft activated by the motor
Quick-action drill chuck
Drill chuck can be fixed by hand.
Drill chuck
Drill bit chuck
Drill drift
Tool to release the bit or the drill chuck from the drill spindle
Taper mandrel
Cone of the drill or of the drill chuck
Tool
Milling cutter, drill bit, countersink, etc.
Workpiece
Workpiece to be turned drilled or machined.
Drilling table
Supporting surface, clamping surface
Drill head
upper part of the drilling machine
Star wheel
Manual operation for the drill feed
Chapter
Short note
new version no.
EC declaration
changed standard
1.2.9
All
Merging of st Vario
2.0
3
Image switch of drill chuck protection
2.0.1
1 + 4
Type speed tables
2.0.2
