OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 2.0.2 2014-11-04
Page 27
Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
3.5
Installation
Check the horizontal orientation of the base of the drilling machine with a spirit level.
Fix the foot of the drilling machine to the substructure with the provided through-holes.
The installation site must be designed in accordance with ergonomic workplace requirements.
ATTENTION!
Tighten the setscrews on the drilling machine only until it is firmly secured and can
neither move during operation nor be turned over.
If the setscrews are too tight and the base is uneven, the stand of the drilling machine may
break.
3.5.1 Fixing
In order to provide for the necessary stability of the bench drill machine and the upright drilling
machine it is necessary to firmly bolt the base of the machine to the subsurface.
We recommend you to use shear connector cartridges resp. heavy-duty anchors.
Fix the foot of the drilling machine to the
substructure with the provided through-
holes.
The Through-bore are marked with
arrows on the machine base.
Img.3-8:
Marking of the fixing points of the bench drill
machines
ATTENTION!
Tighten the fixing screws of the drilling
machine only as much that it is safely
fixed and cannot break away or tilt over.
If the fixing screws are too tight in particular
in connection with an uneven substructure it
may result in a broken stand.
Img.3-9:
Marking of the fixing points of the upright
drilling machines
Through-bore
Arrow sign
Through-bore
Arrow sign
