Optimum B50 GSM, Руководство по эксплуатации

Страница: 67 / 70


201
4
US
Page 67 22 / 07 / 2014 Version 1.0.3 B50 GSM Geared drill
OPTIMUM
M A S C H I N E N - G E R M A N Y
Appendix
9 Appendix
9.1 Copyright

2014
This document is copyright. All derived rights are also reserved, especially those of translation,
re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar means and
recording in data processing systems, neither partial nor total.
The company reserves the right to make technical alterations without prior notice.
9.2 Terminology/Glossary
Item Explanation
Drift Tool for removing the bit or the drill chuck from the bit
holder spindle.
Drill chuck Fixture for holding the bit.
Drilling head Upper part of the geared drill.
Drilling spindle Fixed hollow shaft in which the spindle turns.
Spindle Shaft activated by the motor.
Drilling table Support and fastening surface.
Taper size Taper shank of the bit or drill chuck.
Spindle lever Manual control for advancing the bit.
Keyless chuck Drill chuck which does not use a key.
Piece Piece to be drilled or machined.
Tool Bit, countersink, etc.
Locking bolt Bolt for holding the drilling spindle at a given height
for removing the chuck or tool.