Optimum B50 GSM, Руководство по эксплуатации

Страница: 21 / 70


201
4
US
Page 21 22 / 07 / 2014 Version 1.0.3 B50 GSM Geared drill
OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly

Protruding parts such as stops, handles, etc. need to be secured by measures provided by
the customer if necessary in order to avoid dangers for persons.

Provide sufficient space for assembly and operating staff as well as for material transport.

Also allow for accessibility for setting and maintenance works.

Make sure that the mains power of the milling machine is freely accessible.

Provide for sufficient illumination (minimum value: 47 Lumens/ft², measured at the tool tip).
In case of insufficient intensity of illumination provide for additional illumination i.e. by a
separate workplace illuminator.
INFORMATION
The main power of the geared drill has to be freely accessible.
3.4.2 Assembly
WARNING!
Danger of crushing and overturning.
The geared drill must be installed by at least two persons.
3.4.3 Load suspension point
Fig. 3-1: Load suspension point

Secure the lifting loop in the eye bolt on the drilling head

„Operating material“ on page 17.
3.4.4 Installation

Check the horizontal orientation of the base of the geared drill with a level.
Load suspension
points
Eye-bolt
Lifting fixation
devices