Optimum B50 GSM, Руководство по эксплуатации

Страница: 27 / 70


201
4
US
Page 27 22 / 07 / 2014 Version 1.0.3 B50 GSM Geared drill
OPTIMUM
M A S C H I N E N - G E R M A N Y
Handling
Drilling depth
The geared drill has two micro switches in the drilling depth.
The position of adjustable switching points is adjusted with the drill depth stop screw.
The adjustable switching point switches the automatic spindle feed off. In the mode of operation
“thread cutting“ it changes the direction of rotation.
Change-over switch
The direction of rotation of the drilling spindle is selected with the change-over switch.
Motor speed switch
With the motor speed switch you can change the speed of the motor.
Push button ON
The push-button ON will start up the rotation of the drilling spindle.
Push buttons in spindle lever
The push-button actuator in the spindle lever switches the spindle feed ON or OFF.
In the mode of operation “thread cutting“ where the spindle rotation direction is changed. The
spindle feed is switched off.
Push button OFF
The “push -button OFF“ switches off the rotation of the drilling spindle.
Coolant pump ON/OFF
Switches the coolant pump On or Off.
Machine lighting ON/OFF
Switches the machine lighting On or Off
Operating control light
This operation control light on the control panel will illuminate when the main switch is on.
Main switch
Interrupts or connects the power supply.
Gear selector
Use the gear selectors to select the speed of the spindle.