Optimum B50 GSM, Руководство по эксплуатации

Страница: 28 / 70


2
014
US
Page 28 Geared drill B50 GSM Version 1.0.3 22 / 07 / 2014
Handling
OPTIMUM
M A S C H I N E N - G E R M A N Y
ATTENTION!
Changing the speed when the spindle is turning may cause damage to the machine.
•
Disconnect the machine before changing speed.
• Wait until the spindle has come to a complete stop.
Fig.4-4: Gear selectors
If required, use the rapid break to facilitate the engaging of the indexing position.
INFORMATION
To determine the correct spindle speed, use the speed table on the drill head.
4.3 Drill depth stop
Fig.4-5: Drill depth stop

When you are drilling several holes of the same depth you can use the drill depth stop

Loosen the clamping screw for drill depth stop and move it to the left or right, until the desired
drilling depth is displayed to the indicator.

Re-tighten the clamping screw for drill depth stop.

The spindle can now only be lowered to the set depth.
4.4 Spindle feed
Spindle feed can be manual or automatic.
Gear selectors
Speed table
Indicator drilling depth
Adjusting screw for drilling depth stop
Clamping screw