Optimum B50 GSM, Руководство по эксплуатации

Страница: 10 / 70


2014
US
Page 10 Geared drill B50 GSM Version 1.0.3 22 / 07 / 2014
Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
The user must
Obligations
of the user

have received training in operation of the geared drill,

know the function and principle of operation,

before the machine is first used
- have read and understood the instruction manual,
- be familiar with all safety devices and regulations.
Additional
qualification
requi-
rements
For work on the following machine components there are additional requirements:

Electrical components or equipment: Only an electrician or person working under the
instructions and supervision of an electrician.
Before carrying out work on electric components or operating units, the following measures
need to be performed in the order given.

Disconnect main power

Ensure that the machine cannot be turned on again

Check that there is no voltage
1.5 User positions
The user must stand in front of the geared drill.
INFORMATION
The main power of the geared drill must be freely accessible.
1.6 Safety measures during operation
CAUTION!
Risk due to inhaling health hazardous dusts and mist.
Depending on the material being processed and any additional dusts and mist in the
work area, conditions might impair your health.
Make sure that the generated health hazardous dusts and mist are safely removed at the
point of origin and are collected and/ or filtered from the working area. Use an appropri-
ate dust collection/ filter unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Take additional preventive measures in order to safely avoid health hazards before pro-
cessing flammable materials (e.g. aluminum, magnesium) or before using flammable
additives (e.g. solvents).
1.7 Safety devices
Use the geared drill only with properly functioning safety devices.
Stop the geared drill immediately if there is a failure in the safety device or if it is not functioning
for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the geared drill must only be used when

the cause of the failure has been removed,

it has been verified that there is no resulting danger for personnel or objects.