OPTILAB EYDFA-33-PM-R Скачать руководство пользователя страница 18

EYDFA-33-PM-R Operation Manual  

 

R1.00 

 

 

Page 15 of 15 

 

 

Optilab, LLC

 

 

600 E. Camelback Road, Phoenix, AZ  85012 
Phone:  1-877-303-3888, Fax:  (602) 343-1489, Email:  [email protected] 

 

5.2  Warranty Policy 

 
Optilab,  LLC  warrants  each  new  product  will  be  free  from  defective  material  and 
workmanship  under  normal  use  and  service  for  a  period  of  one  (1)  year  for  all 
products from date of shipment. 
 
During  the  warranty,  Optilab,  LLC  will  either  repair  or  replace,  at  its  option,  any 
defective product (hereafter refer to as Product) within thirty (30) days after its receipt, 
and Optilab, LLC shall return such repaired or replaced Product to the location from 
which  it  originated.  Optilab,  LLC  will  be  responsible  for  both  material  and  labor 
required  to  effect  all  repairs  under  terms  of  the  warranty,  providing  the  Product  is 
returned to Optilab, LLC as specified in the warranty statement. The purchaser shall 
bear  the  freight  charges  incurred  in  returning  the  Product  to  Optilab,  LLC  for 
examination, replace and / or repair of the Product. 
 
The  warranty  does  not  apply  if  the  Product  has  been  modified  by  purchaser  or 
subjected  to  misuse,  neglect,  or  accident,  or  if  the  Product  has  been  repaired  or 
altered  by  an  unauthorized  service  depot  so  that  its  performance  or  reliability  has 
been  impaired,  or  if  the  Product  has  had  the  serial  number  altered,  effaced  or 
removed;  or  if  it  has  been  damaged  by  accessories,  peripherals,  and  other 
attachments not approved by Optilab, LLC. 
 
The  warranty  is  in  lieu  of  all  other  warranties,  expressed  or  implied,  and  no 
representative or person is authorized to assume for Optilab, LLC any other liability 
in connection with the sale of the Product. 
 
 

Содержание EYDFA-33-PM-R



















Отзывы: