OPTIKON KERATRON ONDA, Инструкция по установке и эксплуатации

Страница: 96 / 107

Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN 9-20
2015-03-27
Rev.C
SYMPTOMS CORRECTIVE ACTION
the present value to ‘Unknown’.
e.
Save and exit.
IMPORTANT!
The Scout database is saved with DAO
3.5
(Access ‘97). If you are using an
Access version more updated, do not
modify (saving) the database with the new
version, because the modified file would
not be readable from the Scout software.
it was due to a wrong maneuver by a non
expert user, reload the database and save
it again with the DAO 3.5 version (“prior
Access database version
”)
No test is visible in the “database
explorer”
a.
An empty database has been selected.
b.
Check whether the ‘Group’ selection has
been pressed and no “Group” is present
in the database.
c.
Check whether the ‘Operator’ selection
has been pressed and no “Operator” is
present in the database.
Note
The selections “Group” and “Operator” are of
“toggle” type, and are independent from
alphabetical or chronological selection.
Default settings do not correspond to the
last ones, or the database looks
“disappeared”
a.
Exit the Scout program.
b.
Cancel o change the name (for more
security) to the file
“C:\Keratron\Scout.ini”.
c.
Restart the Scout program and set the
preferred options again.