OPTIKON KERATRON ONDA, Инструкция по установке и эксплуатации

Страница: 92 / 107

Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN 9-16
2015-03-27
Rev.C
artifacts, and here you can intervene by adjusting processing conditions and/or
erasing bad tracks.
To select a graphical display, created automatically and displayed on the screen
during processing (including window Photo-
Process), select “Options” from menu
“Tools”, then select “Processing””. In section “Default Map Type” select the desired
representation, then press OK.
Apart from that setting if, for instance, starting from an Axial map you want the
Curvature to be displayed, click on the above-mentioned map (the title bar is
activated) and then, from the menu, choose “Make” “Axial”
To activate the vario
us types of keratometric data, choose “Options” from the “Tools”
menu. As an alternative, you can click on any map with the right button mouse and
just select “Options”.
The effect of a change in graphic options is immediately applied on all maps already
displayed on the screen, though it can take a few seconds.
Finally, select the “Save Test” menu or icon button.
Discard all images except for the best one for each eye. This will save space on disk
and will speed up the check.
If you did not do it before, fill in patient form. Always put the name and date of birth,
the sex, the group, diagnosis and operator (see Patient Form)
These keywords will be essential to find tests into selected groups, even when your
database would become huge.
To print the screen,
simply choose from the “File” menu “Print Screen”. You can print
while in Acquisition mode only if the “Transparent printing” is enabled
To print one or more tests, both those saved and stored and those displayed on the
screen using print templates, by
the “Print” menu or icon-button, or from the “Test
Manager
”.
9.11 TROUBLESHOOTING KERATRON
™
SCOUT SOFTWARE
9.11.1 KERATRON
™
SCOUT SOFTWARE INSTALLATION
While the installation utility is copying Keratron
™
Scout files in the PC hard disk, the
following message could appear:
THE FILE YOU ARE COPYING IS OLDER THAN THE FILE PRESENT IN
THE PC

In this case the first choice is to leave the newer file (already in the PC),
without overwrite it with the older version.