OPTIKON KERATRON ONDA, Инструкция по установке и эксплуатации

Страница: 86 / 107

Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN 9-10
2015-03-27
Rev.C
The values that have to be entered in these fields can be acquired from the Default
addresses . Considering that the configuration selected must meet the specific
regulations applicable to the network, it is strongly advisable to request the help of
the network administrator when completing these fields.
Figure 9-11: Setting the IP address
for Keratron
™
Onda
Figure 9-12 shows an example of the subnet mask configuration.
NOTE:
The configuration parameters do not have default values. Therefore, it is advisable to
set the required values for all parameters
The existence of the network flow can be checked using field Status.
Figure 9-12: Setting the subnet mask