Optika CL-14, Инструкция по эксплуатации

Страница: 5 / 40

Page 5
Place the illuminator on the
fixing ring, using the three
locking screws (Fig.4).
►
When installing on
LAB-series: remove
the reflected light
illuminator before
installing the round
light illuminator
(Fig. 2-3).
Connect the power supply
to the wall socket (Fig.5)
7. Assembling
8. Using the illuminator
Fig.1
Fig.3 Fig.2
Fig.4 F ig.5
F ig.6
Installing the illuminator
Avoid disassembling the
instrument
Screw the fixing ring on the
bottom of the Stereo head
(Fig.1).
►
The illuminator can be
used on the following
intruments series:
SZN, SZM, LAB.
Do not disassemble the
instrument. This entails the
cancellation of the warranty
and may cause malfunction.
•
Use ON/OFF switch
①
to turn the LEDs on.
•
Use the knob
②
to
adjust the light intensity
(Fig.6).
The power supply should be used only on network sockets
equipped with adequate grounding.
Always disconnect the power supply from the illuminator when
not in use for long time, while you clean it or when you perform
any maintenance.
①
②