![background image](http://html1.mh-extra.com/html/optigene/genie-ht/genie-ht_user-manual_1642323058.webp)
IFU_EN_GEN-HT Version 1.01
July2020
57
Text
This is the result message seen by the user on the results table and recorded in reports.
Colour/ on
These are the foreground and background colour of the displayed result.
Result
The type of the result
None:
An unused result that will block later results until determined.
Provisional:
An intermediate result that will be shown until/unless overridden.
Invalid:
A final result that cannot be determined
Positive:
A final result determined as positive
Negative:
A final result determined as negative
Required
Select all regions and controls that must be positive to satisfy this result.
Prohibited
Select all regions and controls that must be negative to satisfy this result.
Unselected regions and controls have no effect on the result. Regions that are both required and
prohibited should be avoided – this combination may be given a special meaning in the future.
All positive control targets whose scope includes a particular well are collected together in one pair of
required/prohibited tick boxes (likewise for negative control targets). Fine-grained use of controls can be
achieved by advanced users by using reference regions.
This shows the result table showing the
called result.
OVERALL RESULT
Overall result calling takes the results for each well and combines then to give a result for the
whole strip.